![]() ![]() It is hard to disconnect once it mated you can take this advantage or disadvantage.It is compact, durable, and difficult to connect backward.You will get this connector in both types that include with installed wires and with crimp only version. You don’t need to frequently change them and this is the reason you will need a few connectors for a long time. These are one of the robust RC Battery connectors types and considered as the favorite of many people and the reason behind is it can be easily plugged and unplug. You can push it up to 10 Amps and this will be done without any issue. These small plugs rated not more than for 5 Amps. JST RCY Connectors can be used for battery packs that are small under 1500 mAH. It is used to provide power to the motherboard, fans, disk drive, video card, and CD/DVD drives.These little connectors can be used on Blade and Walker micro helicopters that are small as well as single cell LiPo RC aircraft.It provides ease in repair because it is easily replaced.It is very helpful to assemble two different components.You can handle male connector pins easily because they are crimped on to the wires and this is the reason there is no effect of soldering heat on it. ![]() Male Pico blade connectors with attached wires are more suitable than the connector without expensive crimp tool. The thin CA glue cannot be recommended because it can move further and can insulate the connector. You can use thick CA glue to avoid loosening up of pins. It cannot take too much heat for a long time. You have to handle it carefully because it can easily loosen up while soldering wires to the female connector. These connectors are little and also having low cost. This small Molex RC battery connector type is also known as JST PH 2 pin and their ratings are 1 and 2 Amps. Micro RC LiPo Connectors (1-10Amps) Molex Connector: Molex Female Connector ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |